Remington 1100 Disassembly: A Step-by-Step Guide

Hey guys! Today, we're diving deep into the Remington 1100, a shotgun renowned for its reliability and smooth operation. Whether you're a seasoned shooter or just getting started, understanding how to disassemble and reassemble your firearm is crucial for maintenance, cleaning, and repairs. So, let's get started with this comprehensive guide to Remington 1100 disassembly. We’ll walk through each step meticulously, ensuring you can confidently strip down your shotgun for cleaning, maintenance, or necessary repairs.

Safety First: Ensuring a Safe Disassembly Process

Before we even think about touching any tools, safety is paramount. Always, and I mean always, ensure your Remington 1100 is unloaded. Here’s a quick checklist to follow:

Point the Muzzle in a Safe Direction: This is your golden rule. Always point the firearm in a direction where an accidental discharge won't cause harm.
Engage the Safety: Even though we're disassembling, keep the safety on until you've confirmed the chamber is empty.
Visually Inspect the Chamber: Open the action and physically check the chamber to ensure no shells are present. Do this twice, just to be sure.
Double-Check the Magazine Tube: Cycle any rounds out of the magazine tube and visually confirm it’s empty.

Once you’ve completed these steps, you can be confident that your Remington 1100 is safe to handle for disassembly. Remember, safety is not just a step; it's a mindset.

Tools You'll Need

To disassemble your Remington 1100 effectively, you'll need a few basic tools. Don't worry; nothing too fancy is required.

Screwdrivers: A set of flat-head and Phillips-head screwdrivers will come in handy for removing various screws.
Punch Set: A set of punches, both roll pin and standard, will be necessary for driving out pins.
Hammer: A small hammer, preferably with a plastic or rubber head, will help you tap out pins without damaging the components.
Gunsmithing Screwdrivers: These are designed to fit firearm screws precisely, preventing damage or slippage.
Solvent and Lubricant: Cleaning solvent and gun oil are essential for cleaning and lubricating the parts after disassembly.
Work Mat: A clean, non-marring work surface will protect your firearm and prevent small parts from getting lost.

Having these tools at your disposal will make the disassembly process smoother and more efficient. Plus, using the right tools minimizes the risk of damaging your firearm.

Step-by-Step Remington 1100 Disassembly

Alright, let's get to the meat of the matter. Follow these steps carefully, and you'll have your Remington 1100 disassembled in no time.

| Read Also : Bob Dylan's Greatest Hits Vol 1 & 2: A Deep Dive

1. Removing the Forend and Barrel

Unscrew the Magazine Cap: Located at the end of the magazine tube, unscrew the magazine cap. Be careful, as it might be under slight spring pressure.
Slide Off the Forend: Once the cap is removed, gently slide the forend forward off the magazine tube. Set it aside.
Remove the Barrel: With the forend removed, the barrel can be detached. Simply pull it forward and away from the receiver.

2. Removing the Trigger Group

Locate the Trigger Plate Retaining Pins: These pins hold the trigger group in place within the receiver. They are usually located on either side of the receiver, just above the trigger guard.
Use a Punch to Drive Out the Pins: Using your punch set and hammer, carefully drive out the trigger plate retaining pins. Support the receiver on your work mat to prevent damage.
Remove the Trigger Group: Once the pins are removed, the trigger group should slide out of the bottom of the receiver. You might need to wiggle it gently. Store the trigger group in a safe place.

3. Removing the Bolt and Carrier

Locate the Bolt Handle: The bolt handle is on the side of the bolt. Pull it out slightly, so it disengages from the bolt carrier.
Slide the Bolt and Carrier Forward: With the bolt handle disengaged, slide the entire bolt and carrier assembly forward and out of the receiver. This may require a bit of maneuvering.

4. Disassembling the Bolt

Remove the Firing Pin Retaining Pin: Use a punch to drive out the firing pin retaining pin, which holds the firing pin in place.
Remove the Firing Pin: Once the retaining pin is removed, the firing pin should slide out of the bolt. Be careful, as it might be under slight spring pressure.
Remove the Extractor: The extractor is located on the side of the bolt. You may need a small tool to pry it out. It is usually held in place by a spring and plunger, so be cautious when removing it.

5. Disassembling the Trigger Group (Optional)

Remove the Hammer Strut Pin: Use a punch to drive out the hammer strut pin, which connects the hammer to the trigger mechanism.
Carefully Disassemble the Trigger Components: Take care to note the orientation of each part as you disassemble the trigger group. This will make reassembly easier.

Note: Disassembling the trigger group is generally not necessary for routine cleaning. Only disassemble it if you need to replace a specific part or perform a thorough cleaning. If you're not comfortable disassembling the trigger group, it's best to leave it alone.

Cleaning and Inspection

With your Remington 1100 disassembled, now is the perfect time to clean and inspect each component. Use a quality solvent to remove any fouling, carbon buildup, or old lubricant. Pay close attention to the barrel, bolt, and trigger group, as these areas tend to accumulate the most residue. Inspect each part for wear, damage, or signs of corrosion. Replace any worn or damaged parts as necessary. A clean gun is a happy gun!

Reassembly: Putting It All Back Together

Reassembly is essentially the reverse of disassembly. Follow these steps carefully, and you'll have your Remington 1100 back in working order in no time.

1. Reassembling the Bolt

Install the Extractor: Place the extractor in its slot on the side of the bolt. Make sure the spring and plunger are properly seated.
Install the Firing Pin: Slide the firing pin into the bolt. Ensure it's oriented correctly.
Install the Firing Pin Retaining Pin: Insert the firing pin retaining pin to secure the firing pin in place.

2. Reinstalling the Bolt and Carrier

Slide the Bolt and Carrier into the Receiver: Slide the bolt and carrier assembly back into the receiver. Ensure it moves smoothly.
Insert the Bolt Handle: Insert the bolt handle into its slot on the bolt carrier. Make sure it locks into place.

3. Reinstalling the Trigger Group

Slide the Trigger Group into the Receiver: Slide the trigger group back into the bottom of the receiver. Align the holes for the trigger plate retaining pins.
Insert the Trigger Plate Retaining Pins: Insert the trigger plate retaining pins through the receiver and trigger group. Tap them in with a hammer and punch until they are flush with the receiver.

4. Reattaching the Barrel and Forend

Slide the Barrel onto the Receiver: Slide the barrel back onto the receiver. Ensure it is properly seated.
Slide the Forend onto the Magazine Tube: Slide the forend back onto the magazine tube. Ensure it is aligned correctly.
Screw on the Magazine Cap: Screw the magazine cap back onto the end of the magazine tube. Tighten it securely.

5. Final Checks

Function Test: Cycle the action several times to ensure everything is working smoothly. Check the safety, trigger, and bolt release to ensure they are functioning properly.
Visual Inspection: Give the entire firearm a final visual inspection to ensure all parts are properly installed and secured.

Troubleshooting Tips

Even with the best instructions, you might encounter some snags during disassembly or reassembly. Here are a few common issues and how to address them:

Tight Pins: If pins are difficult to remove, try using a penetrating oil and let it sit for a few minutes before attempting to drive them out again. Make sure you're using the correct size punch.
Stuck Components: If a component is stuck, don't force it. Gently wiggle it back and forth while applying slight pressure. Check to ensure there are no hidden screws or pins holding it in place.
Misaligned Parts: If you're having trouble reassembling a part, double-check the orientation and alignment. Refer to diagrams or photos if necessary.

Maintenance and Care Tips

Once you've successfully disassembled, cleaned, and reassembled your Remington 1100, it's important to maintain it properly to ensure its longevity and reliability. Here are a few tips:

Regular Cleaning: Clean your Remington 1100 after each use, or at least every few hundred rounds. This will prevent fouling and carbon buildup from causing malfunctions.
Proper Lubrication: Use a quality gun oil to lubricate all moving parts. This will reduce friction and prevent wear.
Storage: Store your Remington 1100 in a clean, dry place. Use a gun case or sock to protect it from dust and moisture.
Professional Servicing: Consider having your Remington 1100 professionally serviced every few years. A qualified gunsmith can inspect the firearm for wear and damage and perform any necessary repairs.

Conclusion

Disassembling and reassembling your Remington 1100 might seem daunting at first, but with a little patience and attention to detail, it's a manageable task. Understanding how your firearm works and how to maintain it is essential for responsible gun ownership. By following this step-by-step guide, you can confidently disassemble, clean, and reassemble your Remington 1100, ensuring it continues to perform reliably for years to come. Happy shooting, and stay safe!